Industries where failure is not an option.
Our shop floor is organized around regulated, high-consequence industries. Every process, inspection step, and documentation package is built to withstand an audit — because our customers are audited, and we're audited with them.
Aerospace & Defense Machining
From structural brackets to engine components, we machine flight-critical hardware for Tier 1 and Tier 2 aerospace suppliers. Full traceability, AS9102 first articles, and ITAR-controlled data handling are standard, not add-ons.
Flight-critical hardware
Structural brackets, fittings, housings, and actuation components machined to drawing under full FAI.
DFARS-compliant sourcing
Domestic mill certs and specialty alloys through approved US suppliers. Full country-of-origin reporting.
Controlled data handling
ITAR technical data stored on segregated, access-controlled systems. NDA and DUA execution within one business day.
Sectors we support on a recurring basis.
Click a sector to see how our capabilities line up with its unique requirements.
Aerospace
We support both commercial aviation and space platforms with parts that must pass FAI, fatigue testing, and multi-decade service life cycles. Materials range from aluminum and titanium to high-temp superalloys.
- Typical parts: structural brackets, engine mounts, actuator housings, fuel system fittings
- Materials: 7075-T6, Ti-6Al-4V, 17-4 PH, Inconel 718, 15-5 PH
- Documentation: AS9102 FAI, mill certs, certificate of conformance, DFARS reporting
- Lead times: 5–15 business days depending on material and finish
Medical Device & Surgical Instrumentation
We machine surgical instruments, implant tooling, and diagnostic equipment components under cleanroom-compatible processes. Surface finish, burr-free edges, and repeatability are non-negotiable.
- Typical parts: surgical handles, instrument bodies, implant trial components, fluid manifold blocks
- Materials: Ti-6Al-4V ELI, 316L, 17-4 PH, PEEK, Delrin, Radel
- Surface finishes: passivation, bead blast, electropolish coordination, medical-grade anodize
- Documentation: FDA-compatible process documentation, material traceability, CoC
Defense & Small Arms
ITAR-registered, DDTC-aware, and experienced with controlled unclassified information. We machine components for weapons platforms, optics, and soldier-borne systems where documentation and security matter as much as the part itself.
- Typical parts: weapon components, optic housings, mount interfaces, control surface hardware
- Materials: 7075-T6, 4140, 17-4 PH, 4340, MIL-spec anodized aluminum
- Compliance: ITAR, DFARS, MIL-A-8625, MIL-DTL-5541, MIL-STD-1913
- Data handling: segregated storage, access-controlled, NDA and DUA execution
Energy, Oil & Gas
Downhole tools, valve components, and surface equipment built for aggressive chemical and thermal environments. We work routinely in Inconel, Hastelloy, and duplex stainless to meet NACE MR0175 requirements.
- Typical parts: valve bodies, downhole tooling, pump components, manifold blocks, seal housings
- Materials: Inconel 718/625, Hastelloy C-276, duplex 2205, 17-4 PH, Monel 400
- Standards: NACE MR0175 / ISO 15156, API-compatible, ASME-compliant threads
- Finishes: passivation, hard chrome coordination, PTFE coating for seals
Semiconductor & Vacuum Systems
We machine chamber components, wafer handling hardware, and vacuum interfaces where cleanliness, dimensional precision, and surface finish determine yield. Materials are selected for low outgassing and particle generation.
- Typical parts: chamber liners, gas delivery manifolds, wafer handling fixtures, RF shields
- Materials: 6061-T6, 316L, aluminum 5083, PEEK, Vespel, PTFE, ceramic-machinable grades
- Finishes: precision bead blast, electropolish coordination, cleanroom-compatible cleaning
- Surface finish: Ra 8–16 µin on critical faces, no visible tooling marks
Robotics & Industrial Automation
We machine end-effectors, gripper components, and structural hardware for robotics integrators and OEMs. High mix, low volume, tight deadlines — this is our sweet spot.
- Typical parts: end-effector plates, gripper jaws, mounting brackets, actuator housings, gearbox adapters
- Materials: 6061-T6, 7075-T6, 4140, 17-4 PH, Delrin, UHMW, carbon fiber reinforced grades
- Finishes: Type II anodize, laser marking, bead blast, black oxide coordination
- Volume: 1 to 5,000 units with bridge tooling for scaling
Industrial Equipment & Machinery
Replacement parts, custom fixtures, and production components for machine builders, food processing, packaging, and general industrial OEMs. Downtime-driven deadlines are our specialty.
- Typical parts: custom fixtures, tooling plates, gears, sprockets, wear parts, retro-fit components
- Materials: 1018, 4140, 304, 316L, 6061, cast iron, brass, bronze, UHMW, Delrin
- Volume: 1-off replacements up to 20,000-piece production runs
- Finishes: zinc plating coordination, black oxide, powder coat coordination
The credentials behind every shipment.
Our quality system is audited annually, and our compliance documents are available on request for every customer.
Quality Management
Certified quality management system covering all machining, inspection, and shipping operations.
Aerospace Standard
Aerospace quality management compliance for aviation, space, and defense supply chains.
Arms Regulations
Registered with the US Department of State DDTC for defense articles and controlled technical data.
Defense Acquisition
Specialty metals compliance and country-of-origin reporting for US Department of Defense contracts.
Working on a regulated project?
Send us the drawing and the standard you need to meet. We'll tell you exactly how we'd approach it.