Disclaimer

The information on this website is provided for general informational purposes only. While we make reasonable efforts to keep content accurate and up to date, Precision Edge CNC makes no warranties or representations of any kind about the completeness, accuracy, or reliability of any information on this site or any linked external resources.

Last updated: January 12, 2026

Effective: January 12, 2026

Applies to: precisionedgecnc.top

Please read this disclaimer carefully.

By accessing and using this website, you agree to the terms of this Disclaimer. If you do not agree with any part of this Disclaimer, please do not use this website. This Disclaimer should be read together with our Terms of Service and Privacy Policy, which also govern your use of this site.

Specific Disclaimers

Nine disclaimers covering this website.

Each section below addresses a specific aspect of how you may use the information on this site — and the limits of what we promise.

Website Content Disclaimer

The content on this website is provided on an "as is" and "as available" basis. While we strive to keep information current and accurate, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, or suitability of the content. Product specifications, tolerances, lead times, pricing indications, and material availability shown on this site are subject to change without notice and may not reflect current conditions.

Any reliance you place on information from this website is strictly at your own risk. For binding specifications, pricing, and delivery commitments, refer only to a written quotation or signed purchase order issued by Precision Edge CNC.

No Professional Advice

Information on this website — including content about materials, tolerances, machining processes, DFM considerations, and design for manufacturing — is provided for general informational purposes only. It does not constitute engineering, legal, financial, or other professional advice, and should not be relied on as a substitute for consulting with a qualified professional.

Every machining project involves part-specific factors that cannot be fully evaluated without reviewing the actual drawings, application, and requirements. If you need engineering guidance for a specific project, contact us directly to arrange a consultation with a manufacturing engineer.

External Links Disclaimer

This website may contain links to external websites that are not provided or maintained by us. Links to carrier tracking pages, mapping services, standards bodies, and industry resources are provided for convenience only. We do not guarantee the accuracy, relevance, timeliness, or completeness of any information on external websites. The inclusion of any link does not imply endorsement of the site or its content.

When you follow an external link, you leave precisionedgecnc.top and become subject to the terms and privacy policy of the destination website. We have no control over the content or practices of external sites.

Testimonials & Case Studies

Customer testimonials and case studies presented on this website reflect the experiences of specific customers at a specific point in time. They are not a guarantee of future results and are not intended to represent typical outcomes. Results depend on the specific part, material, quantity, and requirements of each project.

Where testimonials have been anonymized to respect NDAs or customer confidentiality, the substance of the quote is preserved but identifying details may be reduced. Names, titles, and locations are shown where the customer has given explicit written consent.

Pricing & Availability

Prices, rates, lead times, and material availability referenced on this website are indicative only and do not constitute an offer to sell. Real prices depend on drawing review, quantity, material availability, and current shop capacity. Any "starting at" or "typical" figures are provided for budgeting purposes and are not binding.

Only a written quotation issued by Precision Edge CNC, accepted by the customer and acknowledged in writing, constitutes a binding offer to manufacture goods at a stated price and lead time.

Technical Accuracy

Technical information on this site — including tolerance ranges, material properties, surface finishes, and process capabilities — is provided as a general guide. Achievable tolerances depend on part geometry, material, tooling, fixturing, and other factors that vary from job to job.

Do not design parts around website specifications alone. Send your drawings for DFM review so we can confirm what tolerances, finishes, and features are achievable for your specific application.

Security Disclaimer

We take reasonable measures to protect our website and the information transmitted through it. However, no method of transmission over the internet or method of electronic storage is completely secure. We cannot guarantee the absolute security of information transmitted to us. You transmit information at your own risk.

Once we receive your information, we apply the safeguards described in our Privacy Policy. If you believe your information has been compromised in connection with our website, contact us immediately at [email protected].

Errors & Omissions

Despite our best efforts, this website may contain typographical errors, inaccuracies, or outdated information. We reserve the right to correct, update, or modify content at any time without prior notice. We do not warrant that the website will be error-free or uninterrupted, that defects will be corrected, or that the website or the server that makes it available are free of viruses or other harmful components.

If you spot an error on our website, please let us know at [email protected] so we can fix it.

Limitation of Liability

To the maximum extent permitted by applicable law, Precision Edge CNC shall not be liable for any loss or damage — including without limitation indirect, incidental, special, or consequential damages, or any loss of profits, revenue, data, or business opportunity — arising out of or in connection with your use of this website or reliance on any content within it.

This limitation applies regardless of whether the claim arises in contract, tort, negligence, strict liability, or any other legal theory, and whether or not we have been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion of certain warranties or the limitation of certain damages, so some of the above limitations may not apply to you.

External Links

About the links on this site.

We link out, but we don't control what's out there.

Precision Edge CNC is not responsible for the content of any external site linked from this website. Links are provided as a convenience and do not imply endorsement of the linked site, its content, or its operators.

We carefully choose what we link to, but external sites change over time. A page that was useful when we linked to it may be moved, edited, or taken down. We do not monitor external sites for ongoing accuracy and we cannot guarantee that links will continue to resolve to the intended content.

If you find a broken or inappropriate external link on our site, please report it to [email protected]. We'll fix it promptly.

Types of External Links on This Site

Mapping Services Google Maps for facility location and directions

Carrier Tracking Pages UPS, FedEx, and LTL carrier tracking for shipment monitoring

Standards & Regulatory Bodies Links to NIST, ASQ, ISO, and other standards organizations

Browser Help Documentation Links to Chrome, Firefox, Safari, Edge cookie management pages

Website content is not a substitute for a conversation.

If you need advice you can act on — a firm quote, a manufacturability opinion, or a technical recommendation — the website is not the right tool. Send us your drawings or pick up the phone.

We'd rather spend 20 minutes on a call clarifying a tolerance callout than have you discover a problem after parts are made.

Get Real Answers

Where to go instead of relying on the website.

Many questions can't be answered by a web page because the answer depends entirely on your part. The following channels give you a real answer, tailored to your project.

For a firm quote: submit drawings through our RFQ form and receive a written response within one business day.
For DFM feedback: send drawings to [email protected] and an engineer will flag issues before quoting.
For a technical conversation: schedule a 30-minute consultation with a manufacturing engineer.
For urgent production questions: call the shop at (970) 962-9843 during business hours.
For quality or documentation questions: contact [email protected] directly.

Questions about this Disclaimer?

If any provision of this Disclaimer is unclear, or if you believe a correction is needed, contact us. Legal notices should be sent to our general inquiries address and will be routed to the appropriate team.

General Inquiries [email protected]

Phone (970) 962-9843

Mailing Address Precision Edge CNC
1115 Des Moines Avenue
Loveland, CO 80537
United States